Effect of Different Parameters on Solar Pond Performance

Authors

  • Seyed Saeed Madani Eastern Mediterranean University

DOI:

https://doi.org/10.18034/apjee.v1i1.211

Keywords:

Salt gradient, solar pond, solar energy

Abstract

By applying a model of finite differences, the thermal behavior of a large solar pond is studied in this paper. The 32-year data of sunny hour’s today-length ratio are used for the estimation of global radiation. The temperature data of a similar duration are used for evaluating the ambient temperature. The effects of the variation of different zone thicknesses on pond performance are studied. It is observed that the upper convective zone thickness should be as thin as possible, the non-convective zone might be from 1 to 2 m and the lower convective zone thickness may be designed based on the application needs. A thicker non convective zone provides more insulation against heat losses, and a thicker lower convective one supplies a higher storage capacity, though with a lower operating temperature. The heat may be extracted from the pond by either a constant or a variable loading pattern. The appropriate loading pattern can be selected based on the needs and operational temperature. The LCZ temperature of the pond, under several heat extraction patterns, is also presented for practical applications.          

 

Downloads

Download data is not yet available.

Author Biography

  • Seyed Saeed Madani, Eastern Mediterranean University

    Eastern Mediterranean University, Gazimağusa, NORTH CYPRUS

References

Akbarzadeh, A. A. & Ahmadi, G. (1980). Computer simulation of the performance of a solar pond in the southern part of Iran, Solar Energy, 24, 143-151.

Anderson, D. A., Tannehill, J. C. & Pletcher, R. H. (1989). Computational fluid mechanics and heat transfer. Hemisphere Publishing Corporation.

Brayant, H. C. & Colbeck, I. (1983). A solar pond for London, Solar Energy, 19, 321.

Hull, J. R., Liu, K. V., Sha, W. T., Kamal, J. & Nielson, C. E. (1984). Dependence of ground heat loss upon solar pond size and perimeter insulation: calculated and experimental results. Solar Energy, 33, p. 25.

Jaefarzadeh, M. R. & Akbarzadeh, A. (2002). Towards the design of low maintenance salinity gradient solar ponds, Solar Energy, 73(5), 375-384.

Jaefarzadeh, M. R. (2000). Design, construction and analysis of the performance of a small salinity gradient solar pond. Research Report (in: Persian), Ferdowsi University of Mashhad, p. 195.

Kaufmann, D. W. (1960). Sodium chloride, Reinhold, Network.

Rabl, A. & Nielsen, C. E. (1975). Solar ponds for space heating. Solar Energy, 17, 1-12.

Samimi, J. (1986). Solar energy for Iran (in: Persian), J. of Physics, No. 3, 79-105.

Sukhatme, S. P. (1984). Solar energy. Tata Mc Graw-Hill Pub. Co., New Delhi.

Tabor, H. & Weinberger, Z. (1981). Non-convecting solar ponds, chap. 10, in: Kreider, J. F. and Kreith, F. (Eds.), Solar Energy Handbook, Mc Graw Hill, New York.

Tabor, H. & Weinberger, Z. (1981). Non-convecting solar ponds, chap. 10, in: Kreider, J. F. & Kreith, F. (Eds.). Solar Energy Handbook, Mc Graw Hill, New York.

Toutounchi, G. H. (1992). Computer simulation of the performances of solar ponds in Iran. J. of Engineering, 5(3&4), 141-144.

Wang, Y. F. & Akbarzadeh, A. A. (1983). A parametric study on solar ponds. Solar Energy, 30 (6), 555-562.

Zhang, Z. M. & Wang, Y. F. (1990). A study on the thermal storage of the ground beneath solar ponds by computer simulation, Solar Energy, 44(5), 243-248.

--0--

Downloads

Published

2014-06-30

How to Cite

Madani, S. . S. . . (2014). Effect of Different Parameters on Solar Pond Performance. Asia Pacific Journal of Energy and Environment, 1(1), 54-70. https://doi.org/10.18034/apjee.v1i1.211

Similar Articles

1-10 of 42

You may also start an advanced similarity search for this article.